What problems should be paid attention to in the handling of diesel generator equipment

Safety Precautions

1.1 Precautions during handling

Diesel generator equipment must be handled with the same care as other electrical equipment

Especially during transportation, avoid vibration, subversion or water immersion

When hoisting, choose a steel cable with sufficient strength and a sling for overall hoisting. You cannot only use individual rings for tilting hoisting, and avoid collision damage during hoisting.

When using a forklift, the capacity of the forklift should be sufficient, and the position of the center of gravity should be confirmed

1.2 Generator and generator disc

The cable wiring must comply with the specification requirements, and the machine equipment must be grounded

Insulation materials should not be aged or damaged

The generator should be installed in a dry place, and if there are traces of water immersion, it should be fully dried, and it can only be started after confirming the insulation performance.

The setting direction of the power switch is open towards the load direction of the generator, and close in the opposite direction

When the power line is very long or there is a capacitor circuit, special attention must be paid because the power is still charged after the power is cut off.

Before checking the circuit, use a detector to confirm whether there is residual electricity

Fences should be fenced and "Danger" signs should be placed in places accessible to general personnel